freq. multipliers - active - smt 7 7 - 118 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com general description features functional diagram output power: +7 dbm sub-harmonic suppression: >25 dbc ssb phase noise: -140 dbc/hz single supply: +5v @ 60 ma 24 lead 4x4 mm smt package: 16 mm 2 electrical specifi cations, t a = +25 c, vcc= 5v typical applications the HMC695LP4(e) is ideal for: ? fiber optic applications ? point-to-point radios ? military radar the HMC695LP4(e) are active miniature x4 frequ- ency multipliers utilizing ingap gaas hbt technology in 4x4 mm leadless surface mount packages. power output is +7 dbm typical from a +5v supply voltage and varies little vs. input power, temperature and supply voltage. suppression of undesired fundamental and sub-harmonics is >25 dbc typical with respect to output signal level. the low additive ssb phase noise of -140 dbc/hz at 100 khz offset helps the user main- tain good system noise performance. the HMC695LP4(e) are ideal for use in lo multiplier chains allowing reduced parts count vs. traditional approaches. parameter min. typ. max. units frequency range, input 2.85 - 3.3 ghz frequency range, output 11.4 - 13.2 ghz input power range -15 5 dbm output power 2 7 dbm sub-harmonic suppression 25 dbc input return loss 15 db output return loss 8db ssb phase noise (100 khz offset) pin= 0 dbm -140 dbc/hz supply current (icc) 60 75 ma HMC695LP4 / 695lp4e smt gaas hbt mmic x4 active frequency multiplier, 11.4 - 13.2 ghz output v00.0808
freq. multipliers - active - smt 7 7 - 119 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com output power vs. temperature @ -10 dbm drive level output power vs. supply voltage @ -10 dbm drive level output power vs. drive level input return loss vs. temperature output return loss vs. temperature HMC695LP4 / 695lp4e v00.0808 smt gaas hbt mmic x4 active frequency multiplier, 11.4 - 13.2 ghz output 0 2 4 6 8 10 11 11.5 12 12.5 13 13.5 14 +25 c +85 c -40 c output power (dbm) output frequency (ghz) -70 -50 -30 -10 10 30 2.75 3 3.25 3.5 fout 1fin 2fin 3fin 5fin 6fin 7fin 8fin output power (dbm) input frequency (ghz) -20 -15 -10 -5 0 8 10121416 +25 c +85 c -40 c return loss (db) frequency (ghz) 0 2 4 6 8 10 11 11.5 12 12.5 13 13.5 14 vcc=4.5v vcc=5.0v vcc=5.5v output power (dbm) output frequency (ghz) 0 2 4 6 8 10 11 11.5 12 12.5 13 13.5 14 -20 dbm -15 dbm -10 dbm -5 dbm 0 dbm +5 dbm output power (dbm) output frequency (ghz) -30 -25 -20 -15 -10 -5 0 2 2.5 3 3.5 4 4.5 5 +25 c +85 c -40 c return loss (db) frequency (ghz) harmonics @ -10 dbm drive level
freq. multipliers - active - smt 7 7 - 120 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com ssb phase noise @ pin = -10 dbm @ 12.5 ghz absolute maximum ratings typical supply current vs. vcc vcc (v) icc (ma) 4.75 59 5.00 60 5.25 61 note: multiplier will operate over full voltage range shown above. rf input (vcc= +5v) +20 dbm vcc +5.5v channel temperature 135 c continuous pdiss (t=85 c) (derate 10.8 mw/c above 85 c) 538 mw thermal resistance (r th ) (junction to ground paddle) 93 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c electrostatic sensitive device observe handling precautions HMC695LP4 / 695lp4e v00.0808 smt gaas hbt mmic x4 active frequency multiplier, 11.4 - 13.2 ghz output -160 -140 -120 -100 -80 -60 -40 -20 0 10 2 10 3 10 4 10 5 10 6 10 7 ssb phase noise (dbc/hz) offset frequency (hz) -160 -140 -120 -100 -80 -60 -40 -20 0 10 2 10 3 10 4 10 5 10 6 10 7 ssb phase noise (dbc/hz) offset frequency (hz) ssb phase noise @ pin = 0 dbm @ 12.5 ghz
freq. multipliers - active - smt 7 7 - 121 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com outline drawing notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. lead spacing tolerance is non-cumulative. 4. pad burr length shall be 0.15mm maximum. pad burr height shall be 0.05mm maximum. 5. package warp shall not exceed 0.05mm. 6. all ground leads and ground paddle must be soldered to pcb rf ground. 7. refer to hittite application note for suggested land pattern. part number package body material lead finish msl rating package marking [3] HMC695LP4 low stress injection molded plastic sn/pb solder msl1 [1] h695 xxxx HMC695LP4e rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] h695 xxxx [1] max peak refl ow temperature of 235 c [2] max peak refl ow temperature of 260 c [3] 4-digit lot number xxxx package information HMC695LP4 / 695lp4e v00.0808 smt gaas hbt mmic x4 active frequency multiplier, 11.4 - 13.2 ghz output
freq. multipliers - active - smt 7 7 - 122 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pin description pin number function description interface schematic 1, 2, 5 - 14, 17, 18, 20 - 24 n/c no connection 3rfin rf input needs to be dc blocked only if there is an external dc voltage applied to rfin. 4, 15 gnd all ground leads and ground paddle must be soldered to pcb rf/dc ground. 16 rfout multiplied output. ac coupled. no external dc blocks necessary. 19 vcc supply voltage 5v HMC695LP4 / 695lp4e v00.0808 smt gaas hbt mmic x4 active frequency multiplier, 11.4 - 13.2 ghz output
freq. multipliers - active - smt 7 7 - 123 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com evaluation pcb item description j1 - j3 pcb mount sma connector c1 1,000 pf capacitor, 0603 pkg. u1 HMC695LP4(e) x4 active multiplier pcb [2] 104610 eval board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: arlon 25fr or rogers 4350 the circuit board used in the fi nal application should be generated with proper rf circuit design tech- niques. signal lines should have 50 ohm imped- ance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 106137 [1] HMC695LP4 / 695lp4e v00.0808 smt gaas hbt mmic x4 active frequency multiplier, 11.4 - 13.2 ghz output
|
